Laminated crushing chamber
Material is reduced through compression, supporting product shape control. Actual results depend on the feed, chamber selection and operating settings.
SECONDARY & TERTIARY CRUSHING
Cone Crusher RP-CC-300
Secondary and tertiary crushing for medium-hard and hard rock
Discuss your requirementsROCKPEAK / IDENTIFICATION
At a glance
| Parameter | RP-CC-300 |
|---|---|
| Maximum feed size | 215 mm |
| Capacity | 90–260 t/h |
| Main motor power | 110 kW |
Pending confirmation. Listed equipment ranges are source specifications, not a guarantee of line output.
ROCKPEAK / OVERVIEW
Equipment overview
The RP-CC-300 Cone Crusher handles secondary and tertiary reduction in metal mines and aggregate plants. Its laminated crushing chamber, hydraulic clearing, overload protection and adjustable eccentricity allow the crushing stage to be configured around the process requirements.
ROCKPEAK / FEATURES
Construction & operating benefits
Hydraulic chamber clearing
Hydraulic clearing assists with retained material when used according to the operating procedure. Shutdown and isolation are required before clearing.
Overload protection and adjustable eccentricity
Overload protection addresses abnormal loading. Eccentricity should be matched to feed size and discharge requirements.
Labyrinth sealing
The sealing arrangement helps protect bearing areas. Maintain lubrication and inspect seals according to the operating manual.
ROCKPEAK / PRINCIPLE
How the machine fits the circuit
Material enters the chamber, is compressed by the motion of the crushing cone and discharges below as its size is reduced. A typical circuit follows primary crushing with cone crushing and screening. Oversize may return to the crusher where a closed circuit is specified.
- Primary reduction
- Cone crushing
- Screening
- Oversize return if specified
Source-described circuit relationship; final equipment and transfer interfaces are project-specific.
ROCKPEAK / SPECIFICATIONS
Technical specifications
| Parameter | RP-CC-300 |
|---|---|
| Cone large-end diameter | 1200 mm |
| Maximum feed size | 215 mm |
| Discharge range | 16–50 mm |
| Capacity | 90–260 t/h |
| Main motor power | 110 kW |
| Machine weight | Approx. 22 t |
Source: supplied Cone Crusher product document and product parameter workbook.
ROCKPEAK / STRUCTURE
Structure & installation inputs
Structure & maintenance access
Laminated crushing chamber Material is reduced through compression, supporting product shape control. Actual results depend on the feed, chamber selection and operating settings.
Hydraulic chamber clearing Hydraulic clearing assists with retained material when used according to the operating procedure. Shutdown and isolation are required before clearing.
Overload protection and adjustable eccentricity Overload protection addresses abnormal loading. Eccentricity should be matched to feed size and discharge requirements.
Labyrinth sealing The sealing arrangement helps protect bearing areas. Maintain lubrication and inspect seals according to the operating manual.
Installation information
The product document lists installation drawings, an operating manual and remote technical guidance. These files were not included as downloadable documents in the supplied package.
Pending confirmation. Foundation loads, anchor layout, lifting arrangements, maintenance clearances, electrical interfaces and issued installation drawings must be confirmed for this machine.
ROCKPEAK / APPLICATIONS
Applications & material suitability
Applications include secondary ore crushing, fine crushing in hard-rock aggregate plants and feed preparation before further processing. Feed should be precrushed and remain within the specified limit. Review gradation, abrasiveness and target product requirements before selection.
ROCKPEAK / CONSTRAINTS
Choose around your operating conditions
Provide hardness, abrasiveness, feed gradation after primary crushing, target throughput and the screening arrangement. The listed 90–260 t/h range depends on moisture, chamber configuration, feeding and circulating load. Discharge range does not replace a finished-product screening specification.
Pending confirmation. Final configuration and application-specific performance must be confirmed in the technical proposal.
ROCKPEAK / PROOF
Performance evidence
Pending confirmation. No model-specific load-test report, certified performance record or cleared project evidence was supplied. No guaranteed project output is claimed.
ROCKPEAK / SERVICE
Packing, delivery & project support
Minimum order: 1 unit. Lead time: 30–45 days, subject to the agreed order schedule. Supplied with standard export packing; confirm shipping arrangements for the destination and transport dimensions. Installation drawings, an operating manual and remote technical guidance are available. On-site supervision and operator training can be arranged for the project.
Pending confirmation. The source lists a 1-unit minimum and 30–45-day lead time. Reconfirm availability, delivery schedule, packing, on-site scope and commercial terms for the actual order.
ROCKPEAK / FAQ
Questions before specifying this equipment
Can it replace a jaw crusher for large feed?
It is designed for secondary or tertiary duty, with a maximum feed size of 215 mm. Larger material requires upstream size reduction.
How do I obtain several finished sizes?
Use suitable screening equipment. Choose open or closed circuit operation according to the required gradation and plant capacity.
How is eccentricity selected?
Selection depends on material, feed distribution and discharge requirements. Use the approved technical proposal and operating instructions.
ROCKPEAK / RELATED
Related equipment for your circuit
Jaw Crusher
The RP-JC-1200 Jaw Crusher reduces large rock and ore for downstream processing. A heavy welded frame, deep crushing chamber and hydraulic discharge adjustment make it suitable for the primary crushing stage in quarries, metal mines and aggregate plants.
View Jaw Crusher details →
Impact Crusher
The RP-IC-1315 Impact Crusher serves limestone processing, aggregate production and construction waste recycling. Three-stage impact plates, high-chromium blow bars and a keyless rotor connection are combined with hydraulic opening for inspection and wear-part maintenance.
View Impact Crusher details →08 / PROJECT INQUIRY
Tell us what
you need to process.
Share the project conditions so equipment and scope can be discussed together.
Contact information
18337606870@163.com+86 371 8888 6666WhatsAppNo. 88, West 4th Ring Road, Zhengzhou, Henan, China
Mon–Fri · 09:00–18:00 (UTC+8)
Contacts follow the supplied document; reachability and mailbox delivery have not been tested.