Three-stage impact plates
Material receives repeated impacts between the rotor and impact plates. Final grading depends on operating settings and the screening circuit.
SECONDARY CRUSHING & RECYCLING
Impact Crusher RP-IC-1315
Secondary crushing for medium-hard materials and recycling
Discuss your requirementsROCKPEAK / IDENTIFICATION
At a glance
| Parameter | RP-IC-1315 |
|---|---|
| Maximum feed size | 350 mm |
| Capacity | 120–250 t/h |
| Main motor power | 180–220 kW |
Pending confirmation. Listed equipment ranges are source specifications, not a guarantee of line output.
ROCKPEAK / OVERVIEW
Equipment overview
The RP-IC-1315 Impact Crusher serves limestone processing, aggregate production and construction waste recycling. Three-stage impact plates, high-chromium blow bars and a keyless rotor connection are combined with hydraulic opening for inspection and wear-part maintenance.
ROCKPEAK / FEATURES
Construction & operating benefits
Hydraulic opening
The opening arrangement provides access for chamber inspection and wear-part servicing. Isolate power and secure the assembly before maintenance.
High-chromium blow bars
The blow bars deliver the crushing impact. Plan inspection, replacement and spare stock around feed abrasiveness and observed wear.
Keyless rotor connection
The rotor uses a keyless connection. Check fastening condition, wear and vibration as part of the maintenance routine.
ROCKPEAK / PRINCIPLE
How the machine fits the circuit
Feed is struck by the rotor blow bars, directed toward the impact plates and reduced through repeated impacts before discharge. A typical circuit includes feeding or primary crushing, impact crushing and screening. Recycling lines also need sorting and contaminant removal.
- Sorting / primary reduction
- Impact crushing
- Screening
- Contaminant control
Source-described circuit relationship; final equipment and transfer interfaces are project-specific.
ROCKPEAK / SPECIFICATIONS
Technical specifications
| Parameter | RP-IC-1315 |
|---|---|
| Rotor dimensions | 1300 × 1500 mm |
| Maximum feed size | 350 mm |
| Discharge range | 40–100 mm |
| Capacity | 120–250 t/h |
| Main motor power | 180–220 kW |
| Machine weight | Approx. 19 t |
Source: supplied Impact Crusher product document and product parameter workbook.
ROCKPEAK / STRUCTURE
Structure & installation inputs
Structure & maintenance access
Three-stage impact plates Material receives repeated impacts between the rotor and impact plates. Final grading depends on operating settings and the screening circuit.
Hydraulic opening The opening arrangement provides access for chamber inspection and wear-part servicing. Isolate power and secure the assembly before maintenance.
High-chromium blow bars The blow bars deliver the crushing impact. Plan inspection, replacement and spare stock around feed abrasiveness and observed wear.
Keyless rotor connection The rotor uses a keyless connection. Check fastening condition, wear and vibration as part of the maintenance routine.
Installation information
The product document lists installation drawings, an operating manual and remote technical guidance. These files were not included as downloadable documents in the supplied package.
Pending confirmation. Foundation loads, anchor layout, lifting arrangements, maintenance clearances, electrical interfaces and issued installation drawings must be confirmed for this machine.
ROCKPEAK / APPLICATIONS
Applications & material suitability
Use it for secondary crushing of medium-hard materials such as limestone and for sorted construction waste. Remove metal, timber and other contaminants before feeding. For hard or highly abrasive rock, compare wear costs with a jaw-and-cone crushing arrangement.
ROCKPEAK / CONSTRAINTS
Choose around your operating conditions
Provide material type, maximum feed size, abrasiveness, target throughput and end use. The listed 120–250 t/h range depends on feed properties, wear condition, discharge settings and circulating load. Confirm the motor configuration in the final technical proposal.
Pending confirmation. Final configuration and application-specific performance must be confirmed in the technical proposal.
ROCKPEAK / PROOF
Performance evidence
Pending confirmation. No model-specific load-test report, certified performance record or cleared project evidence was supplied. No guaranteed project output is claimed.
ROCKPEAK / SERVICE
Packing, delivery & project support
Minimum order: 1 unit. Lead time: 30–45 days, subject to the agreed order schedule. Supplied with standard export packing; confirm shipping arrangements for the destination and transport dimensions. Installation drawings, an operating manual and remote technical guidance are available. On-site supervision and operator training can be arranged for the project.
Pending confirmation. The source lists a 1-unit minimum and 30–45-day lead time. Reconfirm availability, delivery schedule, packing, on-site scope and commercial terms for the actual order.
ROCKPEAK / FAQ
Questions before specifying this equipment
Is it suitable for every type of hard rock?
Review hardness and abrasiveness first. Highly abrasive feed may increase blow-bar consumption; a cone crusher may be worth evaluating.
Can it process mixed demolition waste directly?
Sort the feed, remove metal and other contaminants, and confirm that size and composition suit the selected configuration.
Can crusher adjustment alone deliver a specified grading?
Product grading also requires screening. Match screen apertures, recirculation and crusher settings to the required sizes.
ROCKPEAK / RELATED
Related equipment for your circuit
Jaw Crusher
The RP-JC-1200 Jaw Crusher reduces large rock and ore for downstream processing. A heavy welded frame, deep crushing chamber and hydraulic discharge adjustment make it suitable for the primary crushing stage in quarries, metal mines and aggregate plants.
View Jaw Crusher details →
Cone Crusher
The RP-CC-300 Cone Crusher handles secondary and tertiary reduction in metal mines and aggregate plants. Its laminated crushing chamber, hydraulic clearing, overload protection and adjustable eccentricity allow the crushing stage to be configured around the process requirements.
View Cone Crusher details →08 / PROJECT INQUIRY
Tell us what
you need to process.
Share the project conditions so equipment and scope can be discussed together.
Contact information
18337606870@163.com+86 371 8888 6666WhatsAppNo. 88, West 4th Ring Road, Zhengzhou, Henan, China
Mon–Fri · 09:00–18:00 (UTC+8)
Contacts follow the supplied document; reachability and mailbox delivery have not been tested.